Master of Mechanical Engineering (Leuven) (120 ECTS) Master of Science
Students with a degree obtained at an institution of the Flemish Community
Direct
On the basis of the following degrees, or similar degrees, obtained at an institution of the Flemish Community:
- Bachelor in de ingenieurswetenschappen (Leuven) (Afstudeerrichting werktuigkunde, Hoofdrichting biomedische technologie + Nevenrichting werktuigkunde, Hoofdrichting bouwkunde + Nevenrichting werktuigkunde, Hoofdrichting chemische technologie + Nevenrichting werktuigkunde, Hoofdrichting computerwetenschappen + Nevenrichting werktuigkunde, Hoofdrichting elektrotechniek + Nevenrichting werktuigkunde, Hoofdrichting materiaalkunde + Nevenrichting werktuigkunde, Keuzepakket E + Afstudeerrichting werktuigkunde, Keuzepakket F + Afstudeerrichting werktuigkunde, Keuzepakket G + Afstudeerrichting werktuigkunde, Keuzepakket H + Afstudeerrichting werktuigkunde)
After a preparatory programme
On the basis of the following degrees, or similar degrees, obtained at an institution of the Flemish Community:
- After successfully completing the preparatory programme: Voorbereidingsprogramma: Master in de ingenieurswetenschappen: werktuigkunde (na toelating) (
Leuven, 60 sp. )
, the following degrees are accepted:
- Bachelor in de industriële wetenschappen (na toelating) (Brugge, Geel, Gent, Leuven, Sint-Katelijne-Waver) (Afstudeerrichting elektromechanica, Kernprogramma elektromechanica, Kernprogramma elektromechanica + Optie elektromechanica, Kernprogramma elektromechanica + Optie energie)
- Bachelor in de ingenieurswetenschappen (na toelating) (Leuven) (Afstudeerrichting biomedische technologie + Keuzepakket A, Afstudeerrichting bouwkunde + Administratieve optie (verplicht aan te duiden voor afstudeerrichting bouwkunde bij inschrijving vanaf fase 3), Hoofdrichting biomedische technologie + Nevenrichting chemische technologie, Hoofdrichting biomedische technologie + Nevenrichting computerwetenschappen, Hoofdrichting biomedische technologie + Nevenrichting elektrotechniek, Hoofdrichting biomedische technologie + Nevenrichting materiaalkunde, Hoofdrichting bouwkunde + Nevenrichting architectuur en omgeving, Hoofdrichting bouwkunde + Nevenrichting bedrijfsbeheer, Hoofdrichting bouwkunde + Nevenrichting materiaalkunde, Hoofdrichting chemische technologie + Nevenrichting bedrijfsbeheer, Hoofdrichting chemische technologie + Nevenrichting biomedische technologie, Hoofdrichting chemische technologie + Nevenrichting materiaalkunde, Hoofdrichting computerwetenschappen + Nevenrichting bedrijfsbeheer, Hoofdrichting computerwetenschappen + Nevenrichting biomedische technologie, Hoofdrichting computerwetenschappen + Nevenrichting elektrotechniek, Hoofdrichting elektrotechniek + Nevenrichting bedrijfsbeheer, Hoofdrichting elektrotechniek + Nevenrichting biomedische technologie, Hoofdrichting elektrotechniek + Nevenrichting computerwetenschappen, Hoofdrichting elektrotechniek + Nevenrichting materiaalkunde, Hoofdrichting materiaalkunde + Nevenrichting bedrijfsbeheer, Hoofdrichting materiaalkunde + Nevenrichting biomedische technologie, Hoofdrichting materiaalkunde + Nevenrichting bouwkunde, Hoofdrichting materiaalkunde + Nevenrichting chemische technologie, Hoofdrichting materiaalkunde + Nevenrichting elektrotechniek, Keuzepakket B + Afstudeerrichting biomedische technologie, Keuzepakket B + Afstudeerrichting chemische technologie, Keuzepakket B + Afstudeerrichting computerwetenschappen, Keuzepakket B + Afstudeerrichting elektrotechniek, Keuzepakket B + Afstudeerrichting materiaalkunde, Keuzepakket C + Afstudeerrichting computerwetenschappen, Keuzepakket D + Afstudeerrichting materiaalkunde, Keuzepakket F + Afstudeerrichting biomedische technologie, Keuzepakket F + Afstudeerrichting chemische technologie, Keuzepakket F + Afstudeerrichting computerwetenschappen, Keuzepakket F + Afstudeerrichting elektrotechniek, Keuzepakket F + Afstudeerrichting materiaalkunde, Keuzepakket G + Afstudeerrichting biomedische technologie, Keuzepakket G + Afstudeerrichting chemische technologie, Keuzepakket G + Afstudeerrichting computerwetenschappen, Keuzepakket H + Afstudeerrichting biomedische technologie, Keuzepakket H + Afstudeerrichting chemische technologie, Keuzepakket H + Afstudeerrichting materiaalkunde)
- Master in de industriële wetenschappen: biochemie (na toelating) (Gent, Leuven)
- Master in de industriële wetenschappen: bouwkunde (na toelating) (Brugge, Gent, Sint-Katelijne-Waver)
- Master in de industriële wetenschappen: bouwkunde (na toelating) (Diepenbeek)
- Master in de industriële wetenschappen: chemie (na toelating) (Gent, Leuven, Sint-Katelijne-Waver)
- Master in de industriële wetenschappen: chemie (na toelating) (Diepenbeek)
- Master in de industriële wetenschappen: elektronica-ICT (na toelating) (Brugge, Geel, Gent, Leuven, Sint-Katelijne-Waver)
- Master in de industriële wetenschappen: elektronica-ICT (na toelating) (Diepenbeek)
- Master in de industriële wetenschappen: energie (na toelating) (Geel, Gent)
- Master in de industriële wetenschappen: energie (na toelating) (Diepenbeek)
- Master in de industriële wetenschappen: kunststofverwerking (na toelating) (Brugge)
- Master in de industriële wetenschappen: nucleaire technologie (na toelating) (Diepenbeek)
Students with a degree not obtained at an institution of the Flemish Community
Students who did not obtain their previous degree(s) at an institution of the Flemish Community should submit an application via the Admissions Office: https://www.kuleuven.be/english/application/.
You can find a list of core documents, which should be submitted with every application, here: https://www.kuleuven.be/english/application/requesteddocuments.
Diploma requirements
Bachelor of Engineering: Mechanical EngineeringLanguage requirements
Formal language requirements of the Faculty of Engineering ScienceAdditional requirements
In order to be considered for admission, applicants are required to submit a GRE test. Students who obtained a bachelor’s or a master’s degree in one of the EEA countries, the UK, or Switzerland are exempted from providing GRE scores. Please contact ETS to make sure that your score is made available to KU Leuven in the online ETS verification tool. The institutional code of KU Leuven is 0749.Students with a degree obtained at an institution of the Flemish Community
Direct
On the basis of the following degrees, or similar degrees, obtained at an institution of the Flemish Community:
- Bachelor in de ingenieurswetenschappen (Leuven) (Afstudeerrichting werktuigkunde, Hoofdrichting biomedische technologie + Nevenrichting werktuigkunde, Hoofdrichting bouwkunde + Nevenrichting werktuigkunde, Hoofdrichting chemische technologie + Nevenrichting werktuigkunde, Hoofdrichting computerwetenschappen + Nevenrichting werktuigkunde, Hoofdrichting elektrotechniek + Nevenrichting werktuigkunde, Hoofdrichting materiaalkunde + Nevenrichting werktuigkunde)
After a preparatory programme
On the basis of the following degrees, or similar degrees, obtained at an institution of the Flemish Community:
- After successfully completing the preparatory programme: Voorbereidingsprogramma: Master in de ingenieurswetenschappen: werktuigkunde (na toelating) (
Leuven, 60 sp. )
, the following degrees are accepted:
- Bachelor in de industriële wetenschappen (na toelating) (Brugge, Geel, Gent, Leuven, Sint-Katelijne-Waver) (Afstudeerrichting elektromechanica, Kernprogramma elektromechanica + Optie elektromechanica, Kernprogramma elektromechanica + Optie energie)
- Bachelor in de ingenieurswetenschappen (na toelating) (Leuven) (Hoofdrichting biomedische technologie + Nevenrichting chemische technologie, Hoofdrichting biomedische technologie + Nevenrichting computerwetenschappen, Hoofdrichting biomedische technologie + Nevenrichting elektrotechniek, Hoofdrichting biomedische technologie + Nevenrichting materiaalkunde, Hoofdrichting bouwkunde + Nevenrichting architectuur en omgeving, Hoofdrichting bouwkunde + Nevenrichting bedrijfsbeheer, Hoofdrichting bouwkunde + Nevenrichting materiaalkunde, Hoofdrichting chemische technologie + Nevenrichting bedrijfsbeheer, Hoofdrichting chemische technologie + Nevenrichting biomedische technologie, Hoofdrichting chemische technologie + Nevenrichting materiaalkunde, Hoofdrichting computerwetenschappen + Nevenrichting bedrijfsbeheer, Hoofdrichting computerwetenschappen + Nevenrichting biomedische technologie, Hoofdrichting computerwetenschappen + Nevenrichting elektrotechniek, Hoofdrichting elektrotechniek + Nevenrichting bedrijfsbeheer, Hoofdrichting elektrotechniek + Nevenrichting biomedische technologie, Hoofdrichting elektrotechniek + Nevenrichting computerwetenschappen, Hoofdrichting elektrotechniek + Nevenrichting materiaalkunde, Hoofdrichting materiaalkunde + Nevenrichting bedrijfsbeheer, Hoofdrichting materiaalkunde + Nevenrichting biomedische technologie, Hoofdrichting materiaalkunde + Nevenrichting bouwkunde, Hoofdrichting materiaalkunde + Nevenrichting chemische technologie, Hoofdrichting materiaalkunde + Nevenrichting elektrotechniek)
- Master in de industriële wetenschappen: biochemie (na toelating) (Gent, Leuven)
- Master in de industriële wetenschappen: bouwkunde (na toelating) (Brugge, Gent, Sint-Katelijne-Waver)
- Master in de industriële wetenschappen: bouwkunde (na toelating) (Diepenbeek)
- Master in de industriële wetenschappen: chemie (na toelating) (Gent, Leuven, Sint-Katelijne-Waver)
- Master in de industriële wetenschappen: chemie (na toelating) (Diepenbeek)
- Master in de industriële wetenschappen: elektronica-ICT (na toelating) (Brugge, Geel, Gent, Leuven, Sint-Katelijne-Waver)
- Master in de industriële wetenschappen: elektronica-ICT (na toelating) (Diepenbeek)
- Master in de industriële wetenschappen: energie (na toelating) (Brugge, Geel, Gent)
- Master in de industriële wetenschappen: energie (na toelating) (Diepenbeek)
- Master in de industriële wetenschappen: kunststofverwerking (na toelating) (Brugge)
- Master in de industriële wetenschappen: nucleaire technologie (na toelating) (Diepenbeek)
Students with a degree not obtained at an institution of the Flemish Community
Students who did not obtain their previous degree(s) at an institution of the Flemish Community should submit an application via the Admissions Office: https://www.kuleuven.be/english/application/.
You can find a list of core documents, which should be submitted with every application, here: https://www.kuleuven.be/english/application/requesteddocuments.
Diploma requirements
Bachelor of Engineering: Mechanical EngineeringLanguage requirements
Formal language requirements of the Faculty of Engineering ScienceAdditional requirements
In order to be considered for admission, applicants are required to submit a GRE test. Students who obtained a bachelor’s or a master’s degree in one of the EEA countries, the UK, or Switzerland are exempted from providing GRE scores. Please contact ETS to make sure that your score is made available to KU Leuven in the online ETS verification tool. The institutional code of KU Leuven is 0749.-
This programme can be adapted according to the knowledge which the student has already acquired.
-
Core Courses Part I
All courses all compulsory.
Students who have already taken H0H51A 'Elasticiteits- en plasticiteitsleer', do not take H03Y1A 'Theory of Elasticity and Plasticity', but take an additional course(s) with the same number of credits within the elective courses.5 ECTS Numerical Modelling in Mechanical Engineering H04U3A staff staff
- W.Desmet (coordinator)
- M.Baelmans
- W.Desmet
- L.Van Belle (substitute)
- J.Meyers
Finite Difference and Finite Volume Modelling: Lectures (1.72 ECTS) H04U4a staff staff
Finite Difference and Finite Volume Modelling: Seminars (0.78 ECTS) H04U5a staff staff
Finite Elements: Lectures (1.72 ECTS) H04U6a staff- W.Desmet
- L.Van Belle (substitute)
staff
- W.Desmet
- L.Van Belle (substitute)
Finite Elements: Seminars (0.78 ECTS) H04U7a staff- W.Desmet
- L.Van Belle (substitute)
staff
- W.Desmet
- L.Van Belle (substitute)
6 ECTS Mechanical Drive Systems H04S6A staff- D.Reynaerts (coordinator)
- M.Vetrano
staff
- D.Reynaerts (coordinator)
- M.Vetrano
Pneumatic and Hydraulic Drive Systems: Exercises (0.27 ECTS) H04S0a staff staff
Combustion Engines: Lectures (3.3 ECTS) H04S7a staff staff
Combustion Engines: Exercises (0.7 ECTS) H04S8a staff staff
Pneumatic and Hydraulic Drive Systems: Lectures (1.73 ECTS) H04S9a staff staff
6 ECTS Theory of Elasticity and Plasticity H03Y1A staff staff
- D.Vandepitte (coordinator)
- G.Degrande
- D.Vandepitte
Theory of Elasticity and Plasticity: Lectures (4.2 ECTS) H03Y1a staff Theory of Elasticity and Plasticity: Exercises (1.4 ECTS) H03Y2a staff staff
Theory of Elasticity and Plasticity: PC sessions using Finite Element Software (0.4 ECTS) H03Y3a staff staff
6 ECTS Integrated Project H04P9A staff- M.Vetrano (coordinator)
- H.Bruyninckx
- S.Castagne
- W.Desmet
- F.Naets (substitute)
- B.Gorissen
- K.Gryllias
- L.Helsen
- J.Swevers
- D.Vandepitte
- M.Vetrano
- B.Vrancken
staff
Integrated Project (6 ECTS) H04P9a staff- H.Bruyninckx
- S.Castagne
- W.Desmet
- F.Naets (substitute)
- B.Gorissen
- K.Gryllias
- L.Helsen
- J.Swevers
- D.Vandepitte
- M.Vetrano
- B.Vrancken
5 ECTS Sensors and Measurements Systems H04X7A staff staff
- M.Vetrano (coordinator)
- K.Gryllias
- J.Swevers
- M.Vetrano
Sensors and Measurements Systems: Lectures (3.81 ECTS) H04X7a staff staff
Sensors and Measurements Systems: Exercises and Laboratory Sessions (1.19 ECTS) H04X8a staff staff
-
Core Courses Part II
Students who have already taken one of the following courses (H08U4A 'Systeemtheorie', H01M8A 'Systeemtheorie en regeltechniek', X0B91A 'Systeemtheorie en regeltechniek', X9X15A 'Systeemtheorie', H09B8A 'Systeembenadering van unicellulaire organismen') choose H04X3A 'Control Theory', other students choose H04X3B 'Systems and Control Theory'.
5 ECTS Control Theory H04X3A staff staff
Control Theory: Lectures (3.5 ECTS) H04X3a staff staff
Control Theory: Exercises (1.5 ECTS) H04X4a staff staff
7 ECTS Systems and Control Theory H04X3B staff staff
Control Theory: Lectures (3.5 ECTS) H04X3a staff staff
Control Theory: Exercises (1.5 ECTS) H04X4a staff staff
Systems Theory: Lectures (1.5 ECTS) H09W4a staff staff
Systems Theory: Exercises (0.5 ECTS) H09W5a staff staff
-
Modules
The student chooses one option and takes at least 30 credits in this option.
-
Module: Manufacturing & Management
-
Compulsory Courses Manufacturing & Management
3 ECTS Virtual Product Development H0A15A staff- S.Castagne (coordinator)
- B.Vrancken
staff
- S.Castagne (coordinator)
- B.Vrancken
Virtual Product Development: Lectures (2.4 ECTS) H0A15a staff staff
Virtual Product Development: Exercises (0.6 ECTS) H0A16a staff staff
6 ECTS Design Methodologies H0R71A staff staff
Design Methodologies: Lecture (4.07 ECTS) H0R71a staff staff
Design Methodology and Methods : Exercises and Seminars (1.93 ECTS) H0R72a staff staff
3 ECTS Engineering Economy H00K1A staff Engineering Economy: Lecture (2.44 ECTS) H00K1a staff Engineering Economy: Workshops (0.56 ECTS) H03K2a staff 6 ECTS Production Systems: Machine Tools, Flexible Computer Integrated Production H01Z4A staff staff
- D.Reynaerts (coordinator)
- B.Lauwers
- D.Reynaerts
Production Machines and Systems: Lecture (2.4 ECTS) H04W0a staff staff
Computer Integrated Production: Lecture (2.4 ECTS) H04W8a staff staff
Computer Integrated Production: Excercises (0.6 ECTS) H04W9a staff staff
Production Machines and Systems: Laboratory Sessions (0.6 ECTS) H04X1a staff staff
6 ECTS Dimensional Metrology H0O79A staff staff
Dimensional Metrology: Lecture (4.5 ECTS) H0O79a staff staff
Dimensional Metrology: Exercises and Laboratory Sessions (1.5 ECTS) H0O80a staff staff
3 ECTS Psychological and Social Aspects of the Management of Organisations H04D9A staff staff
Management of Organisations: Psychological and Social Aspects (3 ECTS) H04D9a staff staff
-
Elective Courses Manufacturing & Management
The student complements the compulsory courses with additional courses in the chosen option to a total of at least 30 credits.
Students who have already taken H0A01B 'Operational Management' cannot take the course H04V6A 'Introduction to Operational Management and Logistics'.
Students who have not followed Bedrijfsbeheer in the bachelor’s programme or have not taken H01R7A 'Besliskunde voor bedrijfsbeheer', have to take H04V5A 'Deterministic Decision Models'.3 ECTS Deterministic Decision Models H04V5A staff staff
Deterministic Decision Models: Lecture (2.7 ECTS) H0E56a staff staff
Deterministic Decision Models: Exercises (0.3 ECTS) H0E57a staff staff
3 ECTS Introduction to Operational Management and Logistics H04V6A staff staff
Introduction to Operational Management and Logistics (3 ECTS) H04V6a staff staff
6 ECTS Simulation Theory and Applications D0R19A staff- W.Verbeke
- I.Van Nieuwenhuyse (substitute)
staff
- W.Verbeke
- I.Van Nieuwenhuyse (substitute)
Simulation Theory and Applications (6 ECTS) D0R19a staff- W.Verbeke
- I.Van Nieuwenhuyse (substitute)
staff
- W.Verbeke
- I.Van Nieuwenhuyse (substitute)
3 ECTS Design and Analysis of Experimentation H02V8A staff staff
Design and Analysis of Experimentation (3 ECTS) H02V8a staff staff
3 ECTS Total Quality Management H00N6A staff staff
Total Quality Management (3 ECTS) H00N6a staff staff
6 ECTS Optimization: Special Topics D0M90B staff staff
Optimization: Special Topics (6 ECTS) D0M90a staff staff
3 ECTS Polymer Processing H09F7A staff staff
Polymer Processing (3 ECTS) H09F7a staff staff
3 ECTS Advanced Subtractive Manufacturing H0E62A staff staff
Advanced Subtractive Manufacturing: Lectures (2.4 ECTS) H0E62a staff staff
Advanced Subtractive Manufacturing: Lab Sessions (0.6 ECTS) H0E63a staff staff
3 ECTS Additive Manufacturing Processes - 3D Printing H0E64A staff staff
Additive Manufacturing Processes - 3D Printing: Lectures (2.7 ECTS) H0E64a staff staff
Additive Manufacturing Processes - 3D Printing: Lab Sessions (0.3 ECTS) H0E65a staff staff
3 ECTS Forming Technology H0R73A staff staff
Forming Technology (3 ECTS) H0R73a staff staff
-
-
Module: Mechatronics & Robotics
-
Compulsory Courses Mechatronics & Robotics
3 ECTS Embedded Control Systems H04P5A staff- A.Badri-Spröwitz (coordinator)
- H.Bruyninckx
staff
- A.Badri-Spröwitz (coordinator)
- H.Bruyninckx
Embedded Control Systems (1.6 ECTS) H04P5a staff Embedded Control Systems: Project Work (1.4 ECTS) H04P6a staff 6 ECTS Drive Systems H0T48A staff- J.Driesen (coordinator)
- D.Reynaerts
staff
- J.Driesen (coordinator)
- D.Reynaerts
Electrical Drives: Lecture (2.41 ECTS) H04A5a staff staff
Electrical Drives: Exercises and Laboratory Sessions (0.59 ECTS) H04A7a staff staff
Mechatronic Drive Systems: Lectures (2.7 ECTS) H0T48a staff staff
Mechatronic Drive Systems: Exercises (0.3 ECTS) H0T49a staff staff
3 ECTS Precision Engineering H0O82A staff staff
Precision Engineering: Lectures (2.7 ECTS) H0A17a staff staff
Precision Engineering: Exercises (0.3 ECTS) H0A18a staff staff
3 ECTS Design of Optics H0O83A staff- N.
- R.Boonen (substitute)
staff
- N.
- R.Boonen (substitute)
Design of Optics: Lectures (2.7 ECTS) H0A19a staff- N.
- R.Boonen (substitute)
staff
- N.
- R.Boonen (substitute)
Design of Optics: Exercises (0.3 ECTS) H0A20a staff- N.
- R.Boonen (substitute)
staff
- N.
- R.Boonen (substitute)
6 ECTS Optimization of Mechatronic Systems H04U1C staff staff
- W.Decré (coordinator)
- P.Patrinos
- N.
- W.Decré (substitute)
Optimization: Lecture (4 ECTS) H03E3a staff staff
Optimization of Mechatronic Systems: Exercises and Laboratory Sessions (2 ECTS) H04U1a staff- N.
- W.Decré (substitute)
staff
- N.
- W.Decré (substitute)
6 ECTS Advanced Robot Control Systems H06U9B staff staff
- R.Detry (coordinator)
- A.Badri-Spröwitz
- H.Bruyninckx
- R.Detry
Advanced Robot Control Systems: Lecture (2 ECTS) H06U9a staff Advanced Robot Control Systems: Projectwork (4 ECTS) H06V0a staff staff
-
Elective Courses Mechatronics & Robotics
The student complements the compulsory courses with additional courses in the chosen option to a total of at least 30 credits.
4 ECTS Uncertainty in Artificial Intelligence H02D2A staff staff
- L.De Raedt (coordinator)
- T.De Laet
- L.De Raedt
Uncertainty in Artificial Intelligence: Lecture (3 ECTS) H02D2a staff staff
Uncertainty in Artificial Intelligence: Exercises (0.5 ECTS) H00H2a staff staff
Uncertainty in Artificial Intelligence: Project (0.5 ECTS) H08M4a staff staff
3 ECTS Production Machines and Systems H04W0A staff staff
Production Machines and Systems: Lecture (2.4 ECTS) H04W0a staff staff
Production Machines and Systems: Laboratory Sessions (0.6 ECTS) H04X1a staff staff
4 ECTS Robotics H02A4A staff staff
- H.Bruyninckx (coordinator)
- R.Detry
- N.
- E.Aertbeliën (substitute)
- W.Decré (substitute)
Robotics (4 ECTS) H02A4a staff staff
- H.Bruyninckx
- R.Detry
- N.
- E.Aertbeliën (substitute)
- W.Decré (substitute)
3 ECTS Micro-electromechanical Systems H9X38A staff staff
- B.Gorissen (coordinator)
- M.De Volder
- B.Gorissen
Micro-electromechanical Systems: Theory Lecture (2.7 ECTS) H04T7a staff Micro-electromechanical Systems: Exercises (0.3 ECTS) H04T8a staff 6 ECTS Image Analysis and Understanding H09J2A staff staff
- T.Tuytelaars (coordinator)
- N.
- M.Proesmans (substitute)
Image Analysis and Understanding: Exercises and Practicals (1.17 ECTS) H09I2a staff staff
- T.Tuytelaars
- N.
- M.Proesmans (substitute)
Image Analysis and Understanding: Lecture (4.83 ECTS) H09J2a staff staff
- T.Tuytelaars
- N.
- M.Proesmans (substitute)
3 ECTS Tribology H0T50A staff staff
Tribology: Lectures (2.7 ECTS) H0T50a staff staff
Tribology: Exercises (0.3 ECTS) H0T51a staff staff
6 ECTS Advanced Model Based Control H04Q7A staff staff
Advanced Model Based Control: Theory Lecture (5.28 ECTS) H04Q7a staff staff
Advanced Model Based Control: Practice (0.72 ECTS) H04Q8a staff staff
-
-
Module: Thermotechnical Sciences
-
Compulsory Courses Thermotechnical Sciences
6 ECTS Aerodynamics H04O1A staff staff
- M.Baelmans (coordinator)
- W.Dekeyser
- J.Meyers
Aerodynamics: Lectures (0.9 ECTS) H04I7a staff staff
Aerodynamics: Exercises (0.1 ECTS) H04I8a staff staff
Aerodynamics: Lectures (4.5 ECTS) H04O1a staff staff
Aerodynamics: Exercises (0.5 ECTS) H04O2a staff staff
3 ECTS Energy Challenges H9X53A staff staff
Energy Challenges: Lectures (3 ECTS) H05W7a staff staff
5 ECTS Thermal Systems H0H00A staff staff
- L.Helsen (coordinator)
- B.Boesmans
- L.Helsen
Thermal Systems: Lectures (3.8 ECTS) H0H00a staff staff
Thermal Systems: Exercise and Lab Sessions (1.2 ECTS) H0H01a staff staff
3 ECTS New Energy Technologies: Seminars H0O81A staff staff
New Energy Technologies: Seminars (3 ECTS) H0O81a staff staff
-
Elective Courses Thermotechnical Sciences
The student complements the compulsory courses with additional courses in the chosen option to a total of at least 30 credits.
6 ECTS Physics of Nuclear Reactors H04Q0A staff- N.
staff
- N.
Physics of Nuclear Reactors (6 ECTS) H04Q0a staff- N.
staff
- N.
3 ECTS Numerical Techniques in Fluid Dynamics H04U8A staff staff
- J.Meyers (coordinator)
- M.Baelmans
- J.Meyers
Numerical Techniques in Fluid Dynamics: Theory Lecture (1.34 ECTS) H04U8a staff staff
Numerical Techniques in Fluid Dynamics: Project (1.66 ECTS) H04U9a staff staff
3 ECTS Turbulence H04Y7A staff staff
Turbulence: Theory Lecture (2.7 ECTS) H04Y7a staff staff
Turbulence: Practice (0.3 ECTS) H04Y8a staff staff
4 ECTS Nuclear Energy: Basic Aspects H04B5B staff staff
Nuclear Energy: Basic Aspects (4 ECTS) H0T34a staff staff
3 ECTS Two-Phase Flow: Theory and Applications H0A21A staff staff
Two-Phase Flow: Theory and Applications (3 ECTS) H0A21a staff staff
3 ECTS Advanced Measurement Techniques in Fluid Mechanics H0E66A staff staff
Advanced Measurement Techniques in Fluid Mechanics: Lectures (1.2 ECTS) H0E66a staff staff
Advanced Measurement Techniques in Fluid Mechanics: Lab Sessions (1.8 ECTS) H0E67a staff staff
3 ECTS Nuclear Energy: Deepening Insights H04B5C staff staff
Nuclear Energy: Deepening Insights (3 ECTS) H0H03a staff staff
3 ECTS Turbomachinery, Part 2 H04Y6A staff staff
Turbomachinery, Part 2 (3 ECTS) H04Y6a staff staff
3 ECTS Vehicle Propulsion H0E70A staff Vehicle Propulsion: Lectures (2.7 ECTS) H0E70a staff Vehicle Propulsion: Lab Sessions (0.3 ECTS) H0E71a staff 6 ECTS Advanced Thermodynamics and Plasma Physics H04Q1B staff staff
- W.Dekeyser (coordinator)
- M.Baelmans
- W.Dekeyser (substitute)
- N.Horsten (substitute)
- S.Carli (substitute)
Advanced Thermodynamics and Plasma Physics (6 ECTS) H04Q1a staff staff
- M.Baelmans
- W.Dekeyser (substitute)
- N.Horsten (substitute)
- S.Carli (substitute)
-
-
Module: Aero & Space Engineering
-
Compulsory Courses Aero & Space Engineering
5 ECTS Aerodynamics H04O1B staff- M.Baelmans (coordinator)
- W.Dekeyser
staff
- M.Baelmans (coordinator)
- W.Dekeyser
Aerodynamics: Lectures (4.5 ECTS) H04O1a staff staff
Aerodynamics: Exercises (0.5 ECTS) H04O2a staff staff
5 ECTS Aircraft Performance and Stability H04W6A staff staff
- F.Naets (coordinator)
- F.Giulietti
- F.Naets
- S.Vanpaemel (substitute)
Aircraft Performance and Stability: Theory Lecture (4.43 ECTS) H04W6a staff staff
- F.Giulietti
- F.Naets
- S.Vanpaemel (substitute)
Aircraft Performance and Stability: Practice (0.57 ECTS) H04W7a staff staff
- F.Giulietti
- F.Naets
- S.Vanpaemel (substitute)
5 ECTS Spacecraft Technology and Space Environment H04X5A staff staff
Spacecraft Technology and Space Environment: Lecture (3.87 ECTS) H04X5a staff staff
Spacecraft Technology and Space Environment: Practicals (1.13 ECTS) H04X6a staff staff
5 ECTS Aircraft Engines H04Z8A staff staff
Aircraft Engines: Lecture (4.19 ECTS) H04Z8a staff staff
Aircraft Engines: Laboratory Sessions (0.81 ECTS) H04Z9a staff staff
5 ECTS Production and Quality Assurance Processes in the Aerospace Industry H0E68B staff staff
- S.Castagne (coordinator)
- J.Boeckx
- S.Castagne
Advanced Subtractive Manufacturing: Lectures (2.4 ECTS) H0E62a staff staff
Advanced Subtractive Manufacturing: Lab Sessions (0.6 ECTS) H0E63a staff staff
Quality Assurance Processes in the Aerospace Industry: Lectures (1.6 ECTS) H0E68a staff staff
Quality Assurance Processes in the Aerospace Industry: Practice Sessions (0.4 ECTS) H0E69a staff staff
-
Compulsory Courses Aero & Space Engineering: Elective Course
Students choose one of both courses.
Students who have already taken H02U6A 'Polymeercomposieten', take H0R77A 'Aircraft Materials and Processing Technology for Composites', other students take H0R74A 'Aircraft Materials'.4 ECTS Aircraft Materials H0R74A staff- J.Ivens (coordinator)
- B.Vrancken
staff
- J.Ivens (coordinator)
- B.Vrancken
Aircraft Materials: Part Composite Materials (2.5 ECTS) H0R74a staff staff
Aircraft Materials: Part Metals (1 ECTS) H0R75a staff staff
Aircraft Materials: Laboratory Sessions (0.5 ECTS) H0R76a staff staff
4 ECTS Aircraft Materials and Processing Technology for Composites H0R77A staff staff
- J.Ivens (coordinator)
- F.Desplentere
- Y.Swolfs
- B.Vrancken
Aircraft Materials: Part Metals (1 ECTS) H0R75a staff staff
Design and Applications of Polymers and Composites: Lecture (2.4 ECTS) H0S59a staff Design and Applications of Polymers and Composites: Case Studies (0.6 ECTS) H0S60a staff
-
Elective Courses Aero & Space Engineering
The student complements the compulsory courses with additional courses in the chosen option to a total of at least 30 credits.
6 ECTS Noise Abatement in Machines, Vehicles and Aircraft H0T56A staff staff
- W.Desmet (coordinator)
- H.Denayer (substitute)
- B.Pluymers
Noise Abatement in Machines, Vehicles and Aircraft: Lecture (4.54 ECTS) H0T56a staff staff
- W.Desmet
- H.Denayer (substitute)
- B.Pluymers
Noise Abatement in Machines, Vehicles and Aircraft: Exercises (1.46 ECTS) H0T57a staff staff
- W.Desmet
- H.Denayer (substitute)
- B.Pluymers
4 ECTS Helicopters H0R78A staff staff
Helicopters: Lecture (3.28 ECTS) H0R78a staff staff
Helicopters: Laboratory Sessions (0.72 ECTS) H0R79a staff staff
3 ECTS Aircraft MRO, Maintenance, Repair & Overhaul H0T52A staff staff
Aircraft MRO, Maintenance, Repair & Overhaul: Lectures (2.46 ECTS) H0T52a staff staff
Aircraft MRO, Maintenance, Repair & Overhaul: Excursion (0.54 ECTS) H0T53a staff staff
-
-
Module: Automotive Engineering
-
Compulsory Courses Automotive Engineering
6 ECTS Automotive Structures and Vehicle Dynamics H0T54A staff Automotive Structures and Vehicle Dynamics: Lecture (4.5 ECTS) H0T54a staff Automotive Structures and Vehicle Dynamics: Exercises (1.5 ECTS) H0T55a staff 3 ECTS Embedded Control Systems H04P5A staff- A.Badri-Spröwitz (coordinator)
- H.Bruyninckx
staff
- A.Badri-Spröwitz (coordinator)
- H.Bruyninckx
Embedded Control Systems (1.6 ECTS) H04P5a staff Embedded Control Systems: Project Work (1.4 ECTS) H04P6a staff 6 ECTS Noise Abatement in Machines, Vehicles and Aircraft H0T56A staff staff
- W.Desmet (coordinator)
- H.Denayer (substitute)
- B.Pluymers
Noise Abatement in Machines, Vehicles and Aircraft: Lecture (4.54 ECTS) H0T56a staff staff
- W.Desmet
- H.Denayer (substitute)
- B.Pluymers
Noise Abatement in Machines, Vehicles and Aircraft: Exercises (1.46 ECTS) H0T57a staff staff
- W.Desmet
- H.Denayer (substitute)
- B.Pluymers
3 ECTS Vehicle Propulsion H0E70A staff Vehicle Propulsion: Lectures (2.7 ECTS) H0E70a staff Vehicle Propulsion: Lab Sessions (0.3 ECTS) H0E71a staff 3 ECTS Vehicle Systems H0O78A staff staff
Vehicle Systems (3 ECTS) H0O78a staff staff
-
Elective Courses Automotive Engineering
The student complements the compulsory courses with additional courses in the chosen option to a total of at least 30 credits.
6 ECTS Aerodynamics H04O1A staff staff
- M.Baelmans (coordinator)
- W.Dekeyser
- J.Meyers
Aerodynamics: Lectures (0.9 ECTS) H04I7a staff staff
Aerodynamics: Exercises (0.1 ECTS) H04I8a staff staff
Aerodynamics: Lectures (4.5 ECTS) H04O1a staff staff
Aerodynamics: Exercises (0.5 ECTS) H04O2a staff staff
6 ECTS Structural Dynamics, Analysis and Numerical Modelling H04X0A staff staff
Structural Dynamics, Analysis and Numerical Modelling: Theory Lecture (1.88 ECTS) H04X0a staff staff
Structural Dynamics, Analysis and Numerical Modelling: Workshop (4.12 ECTS) H04Y1a staff staff
3 ECTS Reliability of Mechanical Systems H04Y2A staff- D.Moens (coordinator)
- D.Vandepitte
staff
- D.Moens (coordinator)
- D.Vandepitte
Reliability of Mechanical Systems: Lecture (2.7 ECTS) H04Y2a staff staff
Reliability of Mechanical Systems: Seminars (0.3 ECTS) H04Y3a staff staff
3 ECTS Electrical Drives H9X30A staff staff
Electrical Drives: Lecture (2.41 ECTS) H04A5a staff staff
Electrical Drives: Exercises and Laboratory Sessions (0.59 ECTS) H04A7a staff staff
3 ECTS Mechatronic Drive Systems H0T49A staff staff
Mechatronic Drive Systems: Lectures (2.7 ECTS) H0T48a staff staff
Mechatronic Drive Systems: Exercises (0.3 ECTS) H0T49a staff staff
3 ECTS Structural Optimization H0T88A staff staff
Structural Optimization: Lectures (3 ECTS) H0T88a staff staff
3 ECTS Advanced Techniques for Vibro-acoustic Measurement and Analysis H04Q4A staff- K.Gryllias (coordinator)
- H.Van Der Auweraer
staff
- K.Gryllias (coordinator)
- H.Van Der Auweraer
Advanced Techniques for Vibro-acoustic Measurement and Analysis (3 ECTS) H04Q4a staff
-
-
-
Elective Courses
Students select the amount of courses required to complete their master program to at least 120 ECTS and maximum 122 ECTS, with additional courses from any option.
-
Electives Courses: Manufacturing & Managment
-
Recommended Part
3 ECTS Engineering Economy H00K1A staff Engineering Economy: Lecture (2.44 ECTS) H00K1a staff Engineering Economy: Workshops (0.56 ECTS) H03K2a staff 6 ECTS Production Systems: Machine Tools, Flexible Computer Integrated Production H01Z4A staff staff
- D.Reynaerts (coordinator)
- B.Lauwers
- D.Reynaerts
Production Machines and Systems: Lecture (2.4 ECTS) H04W0a staff staff
Computer Integrated Production: Lecture (2.4 ECTS) H04W8a staff staff
Computer Integrated Production: Excercises (0.6 ECTS) H04W9a staff staff
Production Machines and Systems: Laboratory Sessions (0.6 ECTS) H04X1a staff staff
6 ECTS Dimensional Metrology H0O79A staff staff
Dimensional Metrology: Lecture (4.5 ECTS) H0O79a staff staff
Dimensional Metrology: Exercises and Laboratory Sessions (1.5 ECTS) H0O80a staff staff
3 ECTS Virtual Product Development H0A15A staff- S.Castagne (coordinator)
- B.Vrancken
staff
- S.Castagne (coordinator)
- B.Vrancken
Virtual Product Development: Lectures (2.4 ECTS) H0A15a staff staff
Virtual Product Development: Exercises (0.6 ECTS) H0A16a staff staff
6 ECTS Design Methodologies H0R71A staff staff
Design Methodologies: Lecture (4.07 ECTS) H0R71a staff staff
Design Methodology and Methods : Exercises and Seminars (1.93 ECTS) H0R72a staff staff
-
Optional Part
3 ECTS Design and Analysis of Experimentation H02V8A staff staff
Design and Analysis of Experimentation (3 ECTS) H02V8a staff staff
3 ECTS Deterministic Decision Models H04V5A staff staff
Deterministic Decision Models: Lecture (2.7 ECTS) H0E56a staff staff
Deterministic Decision Models: Exercises (0.3 ECTS) H0E57a staff staff
3 ECTS Advanced Subtractive Manufacturing H0E62A staff staff
Advanced Subtractive Manufacturing: Lectures (2.4 ECTS) H0E62a staff staff
Advanced Subtractive Manufacturing: Lab Sessions (0.6 ECTS) H0E63a staff staff
3 ECTS Total Quality Management H00N6A staff staff
Total Quality Management (3 ECTS) H00N6a staff staff
3 ECTS Additive Manufacturing Processes - 3D Printing H0E64A staff staff
Additive Manufacturing Processes - 3D Printing: Lectures (2.7 ECTS) H0E64a staff staff
Additive Manufacturing Processes - 3D Printing: Lab Sessions (0.3 ECTS) H0E65a staff staff
3 ECTS Forming Technology H0R73A staff staff
Forming Technology (3 ECTS) H0R73a staff staff
-
-
Elective Courses: Mechatronics & Robotics
-
Recommended Part
6 ECTS Optimization of Mechatronic Systems H04U1C staff staff
- W.Decré (coordinator)
- P.Patrinos
- N.
- W.Decré (substitute)
Optimization: Lecture (4 ECTS) H03E3a staff staff
Optimization of Mechatronic Systems: Exercises and Laboratory Sessions (2 ECTS) H04U1a staff- N.
- W.Decré (substitute)
staff
- N.
- W.Decré (substitute)
6 ECTS Advanced Robot Control Systems H06U9B staff staff
- R.Detry (coordinator)
- A.Badri-Spröwitz
- H.Bruyninckx
- R.Detry
Advanced Robot Control Systems: Lecture (2 ECTS) H06U9a staff Advanced Robot Control Systems: Projectwork (4 ECTS) H06V0a staff staff
3 ECTS Embedded Control Systems H04P5A staff- A.Badri-Spröwitz (coordinator)
- H.Bruyninckx
staff
- A.Badri-Spröwitz (coordinator)
- H.Bruyninckx
Embedded Control Systems (1.6 ECTS) H04P5a staff Embedded Control Systems: Project Work (1.4 ECTS) H04P6a staff 6 ECTS Drive Systems H0T48A staff- J.Driesen (coordinator)
- D.Reynaerts
staff
- J.Driesen (coordinator)
- D.Reynaerts
Electrical Drives: Lecture (2.41 ECTS) H04A5a staff staff
Electrical Drives: Exercises and Laboratory Sessions (0.59 ECTS) H04A7a staff staff
Mechatronic Drive Systems: Lectures (2.7 ECTS) H0T48a staff staff
Mechatronic Drive Systems: Exercises (0.3 ECTS) H0T49a staff staff
3 ECTS Precision Engineering H0O82A staff staff
Precision Engineering: Lectures (2.7 ECTS) H0A17a staff staff
Precision Engineering: Exercises (0.3 ECTS) H0A18a staff staff
3 ECTS Design of Optics H0O83A staff- N.
- R.Boonen (substitute)
staff
- N.
- R.Boonen (substitute)
Design of Optics: Lectures (2.7 ECTS) H0A19a staff- N.
- R.Boonen (substitute)
staff
- N.
- R.Boonen (substitute)
Design of Optics: Exercises (0.3 ECTS) H0A20a staff- N.
- R.Boonen (substitute)
staff
- N.
- R.Boonen (substitute)
-
Optional Part
6 ECTS Advanced Model Based Control H04Q7A staff staff
Advanced Model Based Control: Theory Lecture (5.28 ECTS) H04Q7a staff staff
Advanced Model Based Control: Practice (0.72 ECTS) H04Q8a staff staff
3 ECTS Production Machines and Systems H04W0A staff staff
Production Machines and Systems: Lecture (2.4 ECTS) H04W0a staff staff
Production Machines and Systems: Laboratory Sessions (0.6 ECTS) H04X1a staff staff
4 ECTS Robotics H02A4A staff staff
- H.Bruyninckx (coordinator)
- R.Detry
- N.
- E.Aertbeliën (substitute)
- W.Decré (substitute)
Robotics (4 ECTS) H02A4a staff staff
- H.Bruyninckx
- R.Detry
- N.
- E.Aertbeliën (substitute)
- W.Decré (substitute)
3 ECTS Micro-electromechanical Systems H9X38A staff staff
- B.Gorissen (coordinator)
- M.De Volder
- B.Gorissen
Micro-electromechanical Systems: Theory Lecture (2.7 ECTS) H04T7a staff Micro-electromechanical Systems: Exercises (0.3 ECTS) H04T8a staff 6 ECTS Image Analysis and Understanding H09J2A staff staff
- T.Tuytelaars (coordinator)
- N.
- M.Proesmans (substitute)
Image Analysis and Understanding: Exercises and Practicals (1.17 ECTS) H09I2a staff staff
- T.Tuytelaars
- N.
- M.Proesmans (substitute)
Image Analysis and Understanding: Lecture (4.83 ECTS) H09J2a staff staff
- T.Tuytelaars
- N.
- M.Proesmans (substitute)
3 ECTS Tribology H0T50A staff staff
Tribology: Lectures (2.7 ECTS) H0T50a staff staff
Tribology: Exercises (0.3 ECTS) H0T51a staff staff
-
-
Elective Courses: Thermotechnical Sciences
-
Recommended Part
6 ECTS Aerodynamics H04O1A staff staff
- M.Baelmans (coordinator)
- W.Dekeyser
- J.Meyers
Aerodynamics: Lectures (0.9 ECTS) H04I7a staff staff
Aerodynamics: Exercises (0.1 ECTS) H04I8a staff staff
Aerodynamics: Lectures (4.5 ECTS) H04O1a staff staff
Aerodynamics: Exercises (0.5 ECTS) H04O2a staff staff
3 ECTS Energy Challenges H9X53A staff staff
Energy Challenges: Lectures (3 ECTS) H05W7a staff staff
5 ECTS Thermal Systems H0H00A staff staff
- L.Helsen (coordinator)
- B.Boesmans
- L.Helsen
Thermal Systems: Lectures (3.8 ECTS) H0H00a staff staff
Thermal Systems: Exercise and Lab Sessions (1.2 ECTS) H0H01a staff staff
3 ECTS New Energy Technologies: Seminars H0O81A staff staff
New Energy Technologies: Seminars (3 ECTS) H0O81a staff staff
-
Optional Part
6 ECTS Physics of Nuclear Reactors H04Q0A staff- N.
staff
- N.
Physics of Nuclear Reactors (6 ECTS) H04Q0a staff- N.
staff
- N.
3 ECTS Numerical Techniques in Fluid Dynamics H04U8A staff staff
- J.Meyers (coordinator)
- M.Baelmans
- J.Meyers
Numerical Techniques in Fluid Dynamics: Theory Lecture (1.34 ECTS) H04U8a staff staff
Numerical Techniques in Fluid Dynamics: Project (1.66 ECTS) H04U9a staff staff
3 ECTS Turbulence H04Y7A staff staff
Turbulence: Theory Lecture (2.7 ECTS) H04Y7a staff staff
Turbulence: Practice (0.3 ECTS) H04Y8a staff staff
4 ECTS Nuclear Energy: Basic Aspects H04B5B staff staff
Nuclear Energy: Basic Aspects (4 ECTS) H0T34a staff staff
3 ECTS Two-Phase Flow: Theory and Applications H0A21A staff staff
Two-Phase Flow: Theory and Applications (3 ECTS) H0A21a staff staff
3 ECTS Advanced Measurement Techniques in Fluid Mechanics H0E66A staff staff
Advanced Measurement Techniques in Fluid Mechanics: Lectures (1.2 ECTS) H0E66a staff staff
Advanced Measurement Techniques in Fluid Mechanics: Lab Sessions (1.8 ECTS) H0E67a staff staff
3 ECTS Nuclear Energy: Deepening Insights H04B5C staff staff
Nuclear Energy: Deepening Insights (3 ECTS) H0H03a staff staff
3 ECTS Turbomachinery, Part 2 H04Y6A staff staff
Turbomachinery, Part 2 (3 ECTS) H04Y6a staff staff
3 ECTS Vehicle Propulsion H0E70A staff Vehicle Propulsion: Lectures (2.7 ECTS) H0E70a staff Vehicle Propulsion: Lab Sessions (0.3 ECTS) H0E71a staff 6 ECTS Advanced Thermodynamics and Plasma Physics H04Q1B staff staff
- W.Dekeyser (coordinator)
- M.Baelmans
- W.Dekeyser (substitute)
- N.Horsten (substitute)
- S.Carli (substitute)
Advanced Thermodynamics and Plasma Physics (6 ECTS) H04Q1a staff staff
- M.Baelmans
- W.Dekeyser (substitute)
- N.Horsten (substitute)
- S.Carli (substitute)
-
-
Elective Courses: Aero & Space Engineering
-
Recommended Part
5 ECTS Spacecraft Technology and Space Environment H04X5A staff staff
Spacecraft Technology and Space Environment: Lecture (3.87 ECTS) H04X5a staff staff
Spacecraft Technology and Space Environment: Practicals (1.13 ECTS) H04X6a staff staff
5 ECTS Aircraft Engines H04Z8A staff staff
Aircraft Engines: Lecture (4.19 ECTS) H04Z8a staff staff
Aircraft Engines: Laboratory Sessions (0.81 ECTS) H04Z9a staff staff
5 ECTS Aerodynamics H04O1B staff- M.Baelmans (coordinator)
- W.Dekeyser
staff
- M.Baelmans (coordinator)
- W.Dekeyser
Aerodynamics: Lectures (4.5 ECTS) H04O1a staff staff
Aerodynamics: Exercises (0.5 ECTS) H04O2a staff staff
5 ECTS Production and Quality Assurance Processes in the Aerospace Industry H0E68B staff staff
- S.Castagne (coordinator)
- J.Boeckx
- S.Castagne
Advanced Subtractive Manufacturing: Lectures (2.4 ECTS) H0E62a staff staff
Advanced Subtractive Manufacturing: Lab Sessions (0.6 ECTS) H0E63a staff staff
Quality Assurance Processes in the Aerospace Industry: Lectures (1.6 ECTS) H0E68a staff staff
Quality Assurance Processes in the Aerospace Industry: Practice Sessions (0.4 ECTS) H0E69a staff staff
5 ECTS Aircraft Performance and Stability H04W6A staff staff
- F.Naets (coordinator)
- F.Giulietti
- F.Naets
- S.Vanpaemel (substitute)
Aircraft Performance and Stability: Theory Lecture (4.43 ECTS) H04W6a staff staff
- F.Giulietti
- F.Naets
- S.Vanpaemel (substitute)
Aircraft Performance and Stability: Practice (0.57 ECTS) H04W7a staff staff
- F.Giulietti
- F.Naets
- S.Vanpaemel (substitute)
-
Optional Part
6 ECTS Noise Abatement in Machines, Vehicles and Aircraft H0T56A staff staff
- W.Desmet (coordinator)
- H.Denayer (substitute)
- B.Pluymers
Noise Abatement in Machines, Vehicles and Aircraft: Lecture (4.54 ECTS) H0T56a staff staff
- W.Desmet
- H.Denayer (substitute)
- B.Pluymers
Noise Abatement in Machines, Vehicles and Aircraft: Exercises (1.46 ECTS) H0T57a staff staff
- W.Desmet
- H.Denayer (substitute)
- B.Pluymers
4 ECTS Helicopters H0R78A staff staff
Helicopters: Lecture (3.28 ECTS) H0R78a staff staff
Helicopters: Laboratory Sessions (0.72 ECTS) H0R79a staff staff
-
-
Elective Courses: Automotive Engineering
-
Recommended Part
6 ECTS Automotive Structures and Vehicle Dynamics H0T54A staff Automotive Structures and Vehicle Dynamics: Lecture (4.5 ECTS) H0T54a staff Automotive Structures and Vehicle Dynamics: Exercises (1.5 ECTS) H0T55a staff 3 ECTS Vehicle Systems H0O78A staff staff
Vehicle Systems (3 ECTS) H0O78a staff staff
3 ECTS Structural Optimization H0T88A staff staff
Structural Optimization: Lectures (3 ECTS) H0T88a staff staff
3 ECTS Embedded Control Systems H04P5A staff- A.Badri-Spröwitz (coordinator)
- H.Bruyninckx
staff
- A.Badri-Spröwitz (coordinator)
- H.Bruyninckx
Embedded Control Systems (1.6 ECTS) H04P5a staff Embedded Control Systems: Project Work (1.4 ECTS) H04P6a staff 6 ECTS Noise Abatement in Machines, Vehicles and Aircraft H0T56A staff staff
- W.Desmet (coordinator)
- H.Denayer (substitute)
- B.Pluymers
Noise Abatement in Machines, Vehicles and Aircraft: Lecture (4.54 ECTS) H0T56a staff staff
- W.Desmet
- H.Denayer (substitute)
- B.Pluymers
Noise Abatement in Machines, Vehicles and Aircraft: Exercises (1.46 ECTS) H0T57a staff staff
- W.Desmet
- H.Denayer (substitute)
- B.Pluymers
3 ECTS Vehicle Propulsion H0E70A staff Vehicle Propulsion: Lectures (2.7 ECTS) H0E70a staff Vehicle Propulsion: Lab Sessions (0.3 ECTS) H0E71a staff
-
Optional Part
6 ECTS Aerodynamics H04O1A staff staff
- M.Baelmans (coordinator)
- W.Dekeyser
- J.Meyers
Aerodynamics: Lectures (0.9 ECTS) H04I7a staff staff
Aerodynamics: Exercises (0.1 ECTS) H04I8a staff staff
Aerodynamics: Lectures (4.5 ECTS) H04O1a staff staff
Aerodynamics: Exercises (0.5 ECTS) H04O2a staff staff
6 ECTS Structural Dynamics, Analysis and Numerical Modelling H04X0A staff staff
Structural Dynamics, Analysis and Numerical Modelling: Theory Lecture (1.88 ECTS) H04X0a staff staff
Structural Dynamics, Analysis and Numerical Modelling: Workshop (4.12 ECTS) H04Y1a staff staff
3 ECTS Advanced Techniques for Vibro-acoustic Measurement and Analysis H04Q4A staff- K.Gryllias (coordinator)
- H.Van Der Auweraer
staff
- K.Gryllias (coordinator)
- H.Van Der Auweraer
Advanced Techniques for Vibro-acoustic Measurement and Analysis (3 ECTS) H04Q4a staff 3 ECTS Reliability of Mechanical Systems H04Y2A staff- D.Moens (coordinator)
- D.Vandepitte
staff
- D.Moens (coordinator)
- D.Vandepitte
Reliability of Mechanical Systems: Lecture (2.7 ECTS) H04Y2a staff staff
Reliability of Mechanical Systems: Seminars (0.3 ECTS) H04Y3a staff staff
3 ECTS Electrical Drives H9X30A staff staff
Electrical Drives: Lecture (2.41 ECTS) H04A5a staff staff
Electrical Drives: Exercises and Laboratory Sessions (0.59 ECTS) H04A7a staff staff
3 ECTS Mechatronic Drive Systems H0T49A staff staff
Mechatronic Drive Systems: Lectures (2.7 ECTS) H0T48a staff staff
Mechatronic Drive Systems: Exercises (0.3 ECTS) H0T49a staff staff
-
-
Elective Courses: Technical Business
3 ECTS Environmental Economics D0M36A staff staff
Environmental Economics (3 ECTS) D0M36a staff staff
3 ECTS Management and Information Technology H00K2A staff staff
Management and Information Technology: Lecture (2.44 ECTS) H00K2a staff staff
Management and Information Technology (0.56 ECTS) H03K3a staff staff
-
Elective Courses: Materials
3 ECTS Materials Selection H00C0A staff staff
Materials Selection: Lecture (2.4 ECTS) H00C0a staff staff
Materials Selection, Computer Class (0.6 ECTS) H00C1a staff staff
-
Elective Courses: Security & Environment
4 ECTS Dredging Technology for Mechanical Engineers H0A13A staff staff
- G.Vanneste (coordinator)
- J.Fordeyn
- G.Vanneste
Dredging Technology (2.5 ECTS) H06P6a staff staff
Specific Aspects of Dredging Technology for Mechanical Engineers (1.5 ECTS) H0A13a staff staff
4 ECTS Safety of Chemical and Biological Products and of Chemical Processes H08K0A staff- K.Bernaerts (coordinator)
- G.Vercruysse
staff
- K.Bernaerts (coordinator)
- G.Vercruysse
Safety of Chemical Processes: Lecture (1.5 ECTS) H08N5a staff staff
Safety of Chemical Processes: Seminar (0.5 ECTS) H08N6a staff staff
Safety of Chemical and Biological Products: Lecture (1.5 ECTS) H08K1a staff staff
Safety of Chemical and Biological Products: Seminar (0.5 ECTS) H08P3a staff staff
4 ECTS Safety Aspects of Industrial Installations H08P2A staff staff
- K.Bernaerts (coordinator)
- B.Brouwers
- F.Vanwynsberghe
- N.
Safety Aspects of Mechanical Installations: Lecture (1 ECTS) H08N7a staff staff
Safety Aspects of Mechanical Installations: Seminar (0.3 ECTS) H08N8a staff staff
Safety Aspects of Electrical Installations: Lecture (1 ECTS) H05O5a staff staff
Safety Aspects of Electrical Installations: Seminars (0.3 ECTS) H05O8a staff staff
Safety Aspects of Thermal Installations: Lecture (1.1 ECTS) H05O7a staff- N.
staff
- N.
Safety Aspects of Thermal Installations: Seminars (0.3 ECTS) H05P1a staff- N.
staff
- N.
-
Elective Courses: Biomechanics
3 ECTS Biofluid Mechanics H03J2A staff- N.
- P.Verdonck (substitute)
staff
- N.
- P.Verdonck (substitute)
Biofluid Mechanics (3 ECTS) H03J2a staff- N.
- P.Verdonck (substitute)
staff
- N.
- P.Verdonck (substitute)
3 ECTS Biomaterials H03U4A staff staff
Biomaterials: Lecture (3 ECTS) H03U4a staff staff
-
Elective Courses: Industrial Experience
6 ECTS Industriële stage: Werktuigkunde / Industrial Internship: Mechanical Engineering H04Q9A staff staff
Industriële stage: Werktuigkunde / Industrial Internship: Mechanical Engineering (6 ECTS) H04Q9a staff staff
-
-
General Broadening Courses
The student can choose (up to max 6 credits) master courses from the entire educational programme of the KU Leuven.
The student can choose in the first master year H05U5A 'Capita selecta ingenieurswetenschappen I.1. (Athens/Summer Course)' or H05U6A ''Capita selecta ingenieurswetenschappen I.2. (Athens/Summer Course)'.
The student can choose in the second master year H04K9A 'Capita selecta ingenieurswetenschappen II.1. (Athens/Summer Course)' or H05U7A ''Capita selecta ingenieurswetenschappen II.2. (Athens/Summer Course)'.3 ECTS Capita selecta ingenieurswetenschappen I.1. (Athens / Summer Course) H05U5A staff- I.Smets (coordinator)
- N.
staff
- I.Smets (coordinator)
- N.
Capita selecta ingenieurswetenschappen I.1. (Athens / Summer Course) (3 ECTS) H05U5a staff- N.
staff
- N.
3 ECTS Capita selecta ingenieurswetenschappen I.2. (Athens / Summer Course) H05U6A staff- I.Smets (coordinator)
- N.
staff
- I.Smets (coordinator)
- N.
Capita selecta ingenieurswetenschappen I.2. (Athens / Summer Course) (3 ECTS) H05U6a staff- N.
staff
- N.
3 ECTS Capita selecta ingenieurswetenschappen II.1. (Athens / Summer Course) H04K9A staff- I.Smets (coordinator)
- N.
staff
- I.Smets (coordinator)
- N.
Capita selecta ingenieurswetenschappen II.1. (Athens / Summer Course) (3 ECTS) H04K9a staff- N.
staff
- N.
3 ECTS Capita selecta ingenieurswetenschappen II.2. (Athens / Summer Course) H05U7A staff- I.Smets (coordinator)
- N.
staff
- I.Smets (coordinator)
- N.
Capita selecta ingenieurswetenschappen II.2. (Athens / Summer Course) (3 ECTS) H05U7a staff- N.
staff
- N.
-
General Interest Courses
Students choose at least 12 and at most 14 credits from the following list of general interest courses (3 credits part A, at least 6 credits part B)
Exception: the student who has chosen the Module Manufacturing & Management, takes 1 course from part A and max. 1 course from part B.
One of the three courses 'Religions' H0N82A or 'Religie, zingeving en levensbeschouwing' A04D5A / A08C4A is compulsory. Students who already successfully completed a course with the same content before starting this programme, have to take another 3 ECTS general interest course instead.
H04X2A 'Project Management' can only be taken up in conjunction with the 'Master's Thesis' H09Z9A.
Students choose either H09Q1A 'Leadership and Strategic Management' or H09P4A 'Engineering and Entrepreneurship'.
Students may take maximum 9 credit points of the courses Industrial Experience, Industrial Internship, H0T39A 'Entrepreneurship in de praktijk/in practice' and H0T91A 'Entrepreneurship in practice/service-learning'.
Students select, with approval, at most one of the following two courses: H0T39A 'Entrepreneurship in practice' and H0T91A 'Entrepreneurship in practice/service-learning'.-
Part A
One of the three courses 'Religions' H0N82A or 'Religie, zingeving en levensbeschouwing' A04D5A / A08C4A is compulsory.
Students who already successfully completed a course with the same content before starting this programme, have to take another 3 ECTS from part C of the general interest courses instead.
Students are encouraged to take the courses of the 2nd semester (A08C4A or H0N82A), this way they avoid overlap with core courses.3 ECTS Religie, zingeving en levensbeschouwing A04D5A staff staff
Religie, zingeving en levensbeschouwing (3 ECTS) A04D5a staff staff
3 ECTS Religie, zingeving en levensbeschouwing A08C4A staff- N.
- B.Beeckman (substitute)
staff
- N.
- B.Beeckman (substitute)
Religie, zingeving en levensbeschouwing (3 ECTS) A08C4a staff- N.
- B.Beeckman (substitute)
staff
- N.
- B.Beeckman (substitute)
3 ECTS Religions H0N82A staff staff
Religions (3 ECTS) H0N82a staff staff
-
Part B
H04X2A 'Project Management' can only be taken up in conjunction with the 'Master's Thesis' H09Z9A.
3 ECTS Introduction to Safety Engineering H08N0A staff staff
General Introduction to Safety Engineering: Lectures (2.4 ECTS) H08N1a staff staff
General Introduction to Safety Engineering: Seminar (0.6 ECTS) H08N2a staff staff
3 ECTS Ecodesign and Life Cycle Engineering H00O3A staff Ecodesign and Life Cycle Engineering (3 ECTS) H00O3a staff 4 ECTS Intellectual Property Management G0B01A staff staff
Intellectual Property Management (4 ECTS) G0B01a staff staff
6 ECTS Technology Entrepreneurship and New Business Development D0S18A staff staff
Entrepreneurship: Models and Ingredients (2 ECTS) D0O39a staff staff
Entrepreneurship: Development of a Business Plan for High Tech Industries (4 ECTS) D0S18a staff staff
3 ECTS Project Management H04X2A staff Project Management (3 ECTS) H04X2a staff
-
Part C
The student chooses either H09Q1A 'Leadership and Strategic Management' or H09P4A 'Engineering and Entrepreneurship'.
Students may take maximum 9 credit points of the courses Industrial Experience, Industrial Internship, H0T39A 'Entrepreneurship in de praktijk/in practice' and H0T91A 'Entrepreneurship in practice/service- learning'.
Students select, with approval, at most one of the following two courses: H0T39A 'Entrepreneurship in practice' and H0T91A 'Entrepreneurship in practice/service-learning'.3 ECTS Maintenance Management H00M4A staff staff
Maintenance Management (3 ECTS) H00M4a staff staff
3 ECTS Energy Economics H04C4A staff Energy Economics (3 ECTS) H04C4a staff 6 ECTS Engineering & Entrepreneurship H09P4A staff Business Simulations (1.5 ECTS) H09P5a staff Strategic Management (1.5 ECTS) H09P8a staff staff
Creativity and Decision Making for Product Development (2 ECTS) H0T37a staff staff
Technology & Entrepreneurship: Case Studies (1 ECTS) H0T38a staff staff
3 ECTS Entrepreneurship in de praktijk / in practice H0T39A staff staff
- Y.Pontikes (coordinator)
- D.Van Hertem
- N.
- Y.Pontikes (substitute)
- A.Ranga (substitute)
Entrepreneurship in de praktijk / in practice (3 ECTS) H0T39a staff staff
- D.Van Hertem
- N.
- Y.Pontikes (substitute)
- A.Ranga (substitute)
6 ECTS Entrepreneurship in practice / service-learning H0T91A staff staff
- Y.Pontikes (coordinator)
- D.Van Hertem
- N.
- Y.Pontikes (substitute)
- A.Ranga (substitute)
Entrepreneurship in practice / service-learning (6 ECTS) H0T91a staff staff
- D.Van Hertem
- N.
- Y.Pontikes (substitute)
- A.Ranga (substitute)
3 ECTS Dutch Language and Cultures H06U6A staff staff
- L.De Wachter (coordinator)
- N.
- L.De Wachter (substitute)
- S.Van Aken (cooperator)
Dutch Language and Cultures (3 ECTS) H06U6a staff staff
- N.
- L.De Wachter (substitute)
- S.Van Aken (cooperator)
4 ECTS Lessen voor de 21ste eeuw W0AE0A staff staff
- B.Pattyn (coordinator)
- F.Vermeiren (substitute)
- P.d'Hoine
Lessen voor de 21ste eeuw (4 ECTS) W0AE0a staff staff
- B.Pattyn
- F.Vermeiren (substitute)
- P.d'Hoine
3 ECTS Bedrijfsstage: Werktuigkunde / Industrial Internship: Mechanical Engineering H04O7A staff staff
Bedrijfsstage: Werktuigkunde / Industrial Internship: Mechanical Engineering (3 ECTS) H04O7a staff staff
3 ECTS Leadership and Strategic Management H09Q1A staff Business Simulations (1.5 ECTS) H09P5a staff Strategic Management (1.5 ECTS) H09P8a staff staff
3 ECTS Psychological and Social Aspects of the Management of Organisations H04D9A staff staff
Management of Organisations: Psychological and Social Aspects (3 ECTS) H04D9a staff staff
3 ECTS Stage studiebegeleiding: Werktuigkunde H0E73A staff staff
Stage studiebegeleiding: Werktuigkunde (3 ECTS) H0E73a staff
-
-
Master's Thesis
This course is compulsory
24 ECTS Master's Thesis H09Z9A staff- S.Castagne (coordinator)
- N.
staff
- S.Castagne (coordinator)
- N.
Master's Thesis (24 ECTS) H09Z9a staff- N.
staff
- N.
-
Remedial Programme
H08W4A 'Fluïdummechanica' and H08W5A 'Warmteoverdracht' are mandatory for students who took the minor 'Mechanical Engineering' in the bachelor.
Exception: students who took the combination major 'Electrical Engineering with minor Mechanical Engineering' in the bachelor.
Students can only take up to 6 credits of the remedial programme.6 ECTS Elektrische energie en aandrijvingen H01L8A staff staff
Elektrische energie en aandrijvingen: hoorcollege (5.2 ECTS) H01L8a staff staff
Elektrische energie en aandrijvingen: oefeningen (0.4 ECTS) H01L9a staff staff
Elektrische energie en aandrijvingen: practica (0.4 ECTS) H01M0a staff staff
3 ECTS Fluïdummechanica H08W4A staff staff
Fluïdummechanica: hoorcollege (2.65 ECTS) H08W4a staff staff
Fluïdummechanica: oefeningen (0.35 ECTS) H08X0a staff staff
3 ECTS Warmteoverdracht H08W5A staff- N.
- M.Vetrano (substitute)
staff
- N.
- M.Vetrano (substitute)
Warmteoverdracht: hoorcollege (2.65 ECTS) H08W5a staff- N.
- M.Vetrano (substitute)
staff
- N.
- M.Vetrano (substitute)
Warmteoverdracht: oefeningen (0.35 ECTS) H08X1a staff- N.
- M.Vetrano (substitute)
staff
- N.
- M.Vetrano (substitute)
3 ECTS Toegepaste mechanica 3: matrix- & energiemethoden voor kinetostatica H01G7A staff staff
- D.Vandepitte (coordinator)
- H.Bruyninckx
- D.Vandepitte
Toegepaste machanica 3: matrix- & energiemethoden voor kinetostatica: hoorcollege (2.4 ECTS) H01G7a staff Toegepaste mechanica 3: matrix- & energiemethoden voor kinetostatica: oefeningen (0.6 ECTS) H01G8a staff 6 ECTS Energieconversiemachines en -systemen H01N2A staff- M.Baelmans
- N.Horsten (substitute)
staff
- M.Baelmans
- N.Horsten (substitute)
Energieconversiemachines en -systemen: hoorcollege (5.2 ECTS) H01N2a staff- M.Baelmans
- N.Horsten (substitute)
staff
- M.Baelmans
- N.Horsten (substitute)
Energieconversiemachines en -systemen: oefeningen (0.4 ECTS) H01N3a staff staff
Energieconversiemachines en -systemen: practica (0.3 ECTS) H01N4a staff staff
Energieconversiemachines en -systemen: seminaries (0.1 ECTS) H01N5a staff staff
6 ECTS Selectie en dimensionering van machine-elementen H01N8A staff staff
Selectie en dimensionering van machine-elementen: hoorcollege (4 ECTS) H01N8a staff staff
Selectie en dimensionering van machine-elementen: oefeningen (1.4 ECTS) H01N9a staff staff
Selectie en dimensionering van machine-elementen: seminaries (0.6 ECTS) H01O0a staff staff
6 ECTS Productietechnieken en -systemen H01O1A staff staff
- B.Van Hooreweder (coordinator)
- S.Castagne
- B.Lauwers
- B.Van Hooreweder
Productietechnieken en -systemen: hoorcollege (4 ECTS) H01O1a staff Productietechnieken en -systemen: practica, seminaries en bedrijfsbezoeken (2 ECTS) H01O2a staff 6 ECTS Beweging en trillingen H01N0A staff staff
- H.Bruyninckx (coordinator)
- E.Deckers
- W.Desmet
- N.
- A.Badri-Spröwitz (substitute)
Beweging: hoorcollege (2.7 ECTS) H01N1a staff staff
- H.Bruyninckx
- N.
- A.Badri-Spröwitz (substitute)
Trillingen: hoorcollege (2.7 ECTS) H06N3a staff Beweging: oefeningen (0.3 ECTS) H06N4a staff staff
- H.Bruyninckx
- N.
- A.Badri-Spröwitz (substitute)
Trillingen: oefeningen (0.3 ECTS) H06N5a staff 4 ECTS MOOC Mathematical Techniques for Problem Solving in Engineering and Science H0O29A staff staff
- D.Huybrechs (coordinator)
- R.Cools
- D.Huybrechs
- S.Poedts
- R.Vandebril
Mathematical Techniques for Problem Solving in Engineering and Science (4 ECTS) H0O29a staff
-