All programmes > Manufacturing Technologies 2

Manufacturing Technologies 2 (B-KUL-T3OPR2)

3 ECTSEnglish30 Second termCannot be taken as part of an examination contract
Dewulf Wim (coordinator) |  Ivens Jan |  Labey Luc |  Loenders Jef |  Van Rymenant Patrick |  N. |  Dehertoghe Nicolas (substitute) |  Dewulf Wim (cooperator) |  Van Riel Thomas (cooperator)  | LessMore
OC Elektromechanica - Campus Groep T Leuven

Aims

Learning outcomes and development goals

  • K2L Have a basic scientific-disciplinary knowledge and understanding in one of the areas based on the chosen specialization
  • I1L Problem analysis and solving
  • I5V Assuming an entrepreneurial attitude
  • P1L Operationalising
  • G1L Acquiring and processing information
  • G3L Critical reflection
  • G4V Assuming a cooperative attitude
  • G5L Professional conduct

Objectives

  • The student knows and understands non-separating techniques for manufacturing discrete products from a variety of materials.
  • The student understands the relationship between geometric design, material properties and structure, manufacturing techniques, final product properties, and related economics.

Previous knowledge

Structure, behaviour and sustainability of materials (strict)

Manufacturing technologies 1: machining and separating (flexible)

Order of Enrolment

Mixed prerequisite:
You may only take this course if you comply with the prerequisites. Prerequisites can be strict or flexible, or can imply simultaneity. A degree level can be also be a prerequisite.
Explanation:
STRICT: You may only take this course if you have passed or applied tolerance for the courses for which this condition is set.
FLEXIBLE: You may only take this course if you have previously taken the courses for which this condition is set.
SIMULTANEOUS: You may only take this course if you also take the courses for which this condition is set (or have taken them previously).
DEGREE: You may only take this course if you have obtained this degree level.


FLEXIBLE(T2OPR1) OR FLEXIBLE(T2OPR2)

The codes of the course units mentioned above correspond to the following course descriptions:
T2OPR1 : Productietechnologie 1
T2OPR2 : Manufacturing Technologies 1

This course unit is a prerequisite for taking the following course units:
T3PIM1 : Ingenieursbeleving 3 - EM: mechatronica
T3PIM2 : Engineering Experience 3 - EM: Mechatronics
T3QIO1 : Ingenieursbeleving 3 - EM: ontwerp
T3QIO2 : Engineering Experience 3 - EM: Design
T4UAM2 : Advanced Manufacturing (No longer offered this academic year)
T4UDP2 : 3D Printing
T4UCM2 : Computer-Aided Manufacturing (CAM)
T4UMM2 : Manufacturing Metrology

Identical courses

This course is identical to the following courses:
T3OPR1 : Productietechnologie 2: materiaalbehandeling en vormgeving (No longer offered this academic year)
JPI14S : Productietechnologie 2
ZA0200 : Productietechnologie 2
YI1419 : Productietechnologie 2
B30758 : Productietechnologie 2

Is included in these courses of study

Activities

2 ects. Manufacturing Technologies 2: Lecture (B-KUL-T3hPR2)

2 ECTSEnglishFormat: Lecture18 Second term
Ivens Jan |  Labey Luc |  Van Rymenant Patrick |  Dewulf Wim (cooperator)
OC Elektromechanica - Campus Groep T Leuven

Content

Equilibrium structure and heat treatments of steel, cast iron and non-ferrous metals

Non-separating manufacturing of metal products: principles, calculations, technological variants and Design for Manufacturing:

o Casting technology and powder-based processes

o Forming technology

o Additive manufacturing

Joining techniques: welding and glueing

Shaping and Design for Manufacturing of polymers and composites

Manufacturing of ceramic products

 

Course material

Kals et al., Industrial Production (Boom Uitgevers)

Extra course material via Toledo

 

1 ects. Manufacturing Technologies 2: Lab Session (B-KUL-T3pPR2)

1 ECTSEnglishFormat: Practical12 Second term
Loenders Jef |  N. |  Dehertoghe Nicolas (substitute) |  Van Riel Thomas (cooperator)
OC Elektromechanica - Campus Groep T Leuven

    Evaluation

    Evaluation: Manufacturing Technologies 2 (B-KUL-T72126)

    Type : Partial or continuous assessment with (final) exam during the examination period
    Description of evaluation : Oral, Written, Participation during contact hours, Process evaluation
    Type of questions : Open questions
    Learning material : Calculator

    Explanation


    Calculation of the final mark

    The final mark of this course is calculated based on the published component marks with the following weighting factors:

    • Component mark for Lecture: 100%
    • Component mark for Lab sessions: Bonus/Malus (-2/+2)

    The only exception to this rule is described in the complementary regulation of the Faculty of Engineering Technology to article 66 in the Regulations on Education and Examinations. A "fail" mark for the company visits is hereby considered equivalent to a partial grade <5/20.

    Calculation of the published component marks

    The Lecture is evaluated during a written examination. A non-graphic calculator may be used during the exam.

    The lab sessions are permanently evaluated (attitude, preparation, active cooperation,...).

    Absences

    Participation in the permanently evaluated activities is mandatory. Students who miss one or more sessions due to force majeure (e.g., illness) must justify their absence in writing (in the case of illness by a certificate of illness) to the education ombuds and the instructor concerned. They must make arrangements with the instructor(s) in charge with a view to making up the missed session(s). Unauthorized absence will result in a NA.

    For absences during the teaching weeks, please contact the education ombuds on the first day of your absence. If you missed one or more obligatory sessions, please contact your professor as soon as possible and certainly within a week. For absences within the exam period, please contact the exam ombuds on the first day of your absence.

    When needed, additional information on the evaluation activities is provided during the lessons and/or made available on the Toledo pages of the course. When needed, additional information on the evaluation activities is provided during the lessons and/or made available on the toledo pages of the course.

    Information about retaking exams

    This course unit allows partial mark transfers in case of partial pass mark:

    • T3hPR2 - Manufacturing Technologies 2: Lecture (during and beyond academic year)
    • T3pPR2 - Manufacturing Technologies 2: Lab Session (during and beyond academic year)

    Students who have attended the lab sessions regularly during the year can improve their score by independently solving one or more of the lab sessions that will be selected by the instructor involved. Students that did not regularly attend the lab sessions as defined by the exam regulations (i.e. the students that received an NA-score) cannot redo the exam.